华为三层交换机如何开启路由器功能?

发布网友 发布时间：2022-04-24 01:26

我来回答

共1个回答

热心网友 时间：2022-05-19 18:00

华为的三层交换机默认是打开路由功能的，需要做的是把VLAN和地址规划了

划分VLAN，并描述
vlan 1
description local-S3600 vlan 2
description link-to-wenquan
vlan 3
description link-to-ruzhou
vlan 4
description link-to-xiaotun
vlan 5
description link-to-baofeng
vlan 6
description link-to-pingxi
vlan 7
description link-to-pingnan
vlan 8
description Uplink-to-Putian
vlan 9
description link-to-pingxicentre

给VLAN 划网关 interface Vlan-interface2
description link to wenquan ip address 10.41.77.41 255.255.255.192 interface Vlan-interface3
description link to ruzhou ip address 10.41.77.105 255.255.255.192 interface Vlan-interface4
description link to xiaotun ip address 10.41.77.169 255.255.255.192 interface Vlan-interface5
description link to baofeng ip address 10.41.77.233 255.255.255.192 interface Vlan-interface6
description link to pingxi ip address 10.41.78.41 255.255.255.192 interface Vlan-interface7
description link to pingnan ip address 10.41.78.105 255.255.255.192 interface Vlan-interface8
description uplink to putian ip address 10.41.244.102 255.255.255.252 interface Vlan-interface9
description link to pingxicentre ip address 10.41.80.233 255.255.255.192

给VLAN 指定端口
interface Ethernet1/0/2
description link to wenquan port access vlan 2
interface Ethernet1/0/3
description link to ruzhou port access vlan 3
interface Ethernet1/0/4
description link to xiaotun port access vlan 4
interface Ethernet1/0/5
description link to baofeng port access vlan 5
interface Ethernet1/0/6
description link to pingxi port access vlan 6 interface Ethernet1/0/7
description link to pingnan port access vlan 7
interface Ethernet1/0/8
description uplink to putian port access vlan 8
interface Ethernet1/0/9 to Ethernet1/0/24
description link to pingxicentre port access vlan 9  

配置路由协议 //
（1）用RIP配动态路由 rip
network 10.41.77.41
network 10.41.77.105
network 10.41.77.169
network 10.41.77.233
network 10.41.78.41
network 10.41.78.105
network 10.41.80.233
network 10.41.244.102