怎样用命令创建win8启动任务
发布网友
发布时间：2022-11-26 21:55
共2个回答
热心网友
时间：2023-10-12 15:35
管理员身份运行cmd，输入diskpart
DISKPART>
然后依次输入：
list disk
select disk 1
clean
create partition primary
active
format fs=fat32 quick
assign
exit
然后将安装镜像所有文件拷贝进去
如果不能正常启动，则使用修复命令：I:\Boot\Bootsect.exe /NT60 I:
Gone are the days, when we used to burn CDand DVDs to install operating systems.Now all modern operating systems lets you install using PEN Drive / USB Storage Device / USB Stick. And this articledescribes step by step guide to formatand create bootable Windows Vista / Windows 7 / Windows 8 USB Stick.
Prerequisites:
Windows Vista / Windows 7 / Windows 8 ISOor installation files
A 4GB USB 2.0 Storage device (Itsrecommended to use USB 2.0 or USB 3.0 device for optimal performance)
How To:
Plug your USB storage device. and runCommand Prompt and execute the followingcommands one by one.
Diskpart
Run Disk partition utility
List disk
To get disk index that is used toperform disk partitioning.
Select disk n
Selects disk n to perform disk partitioning. n is the number for your USBflash drive you obtained from abovecommand.
Clean
Flush your existing all USB drive’s partitions.
Create partition primary
Creates a partition as primary partition.
Active
Set the partition as active to hold bootmgr.
Format FS=NTFS QUICK
Perform a quick format on the USB Flash drive
Assign
Assign a drive letter to the partition
Exit
To quit Diskpart utility
Now copy all setup files to USB storagedevice… and that’s All.
Re-boot your PC with it, you will be ableto boot and install Windows Vista/Windows 7/Windows 8 using USB Stick.
Note: If you face any trouble to boot withit or unable to boot, try this FIX.
I:\Boot\Bootsect.exe /NT60 I:
Where I: is the drive letter of USB Stick
热心网友
时间：2023-10-12 15:36
