如何用命令查看linux的网卡吞吐量或最大网

发布网友发布时间：2022-05-16 19:04

共1个回答

热心网友时间：2023-11-24 13:27

ip -s link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    RX: bytes  packets  errors  dropped overrun mcast
    0          0        0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    0          0        0       0       0       0
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 00:0c:29:b7:e0:5d brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast
    2607102    11333    0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    228349     1990     0       0       0       0

看实时的装 speedometer 2.8 shell下图形实时流量

yum install   -y python-urwid wget
wget http://excess.org/speedometer/speedometer-2.8.tar.gz
tar -zxvvf speedometer-2.8.tar.gz
cd speedometer-2.8
cp speedometer.py /usr/local/bin/speedometer
cd ~
chown root: /usr/local/bin/speedometer
chmod 755 /usr/local/bin/speedometer
speedometer -rx ens33 -rx ens33

(ens33 是网卡  用 ip link 命令可以看到  把ens33 换成自己的网卡)
speedometer -rx ens33 -c -rx ens33